Imer

Features Fits Imer Mighty Small 50, Koine 35, Koine 4, Step-Up 120, and Silent 300 Prestige pumps Optional accessory for spraying overhead or into...

Features Premium segmented blades Designed specifically for abrasive masonry applications Will cut block, brick, sandstone, and soft stone For wet...

Features Powerful 1.75 hp 110v 15amp motor turns the blade at 2800 RPM 21" cutting length extends to 24" with plunge cut Super light at only 48 l...

Features Powerful 1.75 hp, 110 V, 15 amp motor turns the blade at 2800 RPM Accurately cut both straight and 45° miter cuts with tilting head and ...

Features Powerful 1.75 hp, 110 V, 15 amp motor turns the blade at 2800 RPM Accurately cut both straight and 45° miter cuts with tilting head and ...

Features Powerful and accurate 4 hp high torque motor Stainless steel cutting surface with up to 48" cutting length Integrated stand with wheel k...

Features Best for accurate, chip-free cutting performance Chip-free cuts are essential for cosmetic appearance For wet use only Ideal for Cerami...

Features Continuous mixing, spraying and pumping of pre-blended cementitious and gypsum based mortars, stucco, fireproofing, self-leveling underl...

Features Designed almost exclusively for mixing and pumping wall grouts and self-leveling underlayments R8 Stator and rotor with tab Dust grate e...

Features Hard masonry turbo blades Designed to handle a multitude of applications Will cut concrete, block, brick, paver brick, hard brick, masonr...

Details This 33mm material hose is the primary hose for Koine 4, Step Up 120 and Silent 300 Prestige for use with non aggregate materials. Thi...

Features For use with Imer Mighty Small 50 and Koine 35 pumps Quickly and easily connects to tanks or other hoses Equipped with cam couplings used...

Features Attachment for spraying fireproofing, repair mortar, stucco base coat (1/8” or more of build-up) Also works for spraying waterproofing, a...

Features 1.75 hp, 110 V electric motor designed for 100% duty cycle for continuous use For pumping grout and self-leveling underlayments with hos...

Features Designed for controlled pressure grout injection to ensure material completely fills joint Fits Imer Mighty Small 50 pump Pressure regula...

Features Designed for spraying thinner coats such as acrylic stucco and coatings Fits Imer Mighty Small 50 pump For use without the compressor for...

Features For tuck-pointing and grouting Fits Imer Mighty Small 50 pump Tuck point gun plugs into the remote control switch for easy on/off pump co...

Features Optional accessory for use when tuck-pointing with Imer Mighty Small 50 Vibrating hopper is used to keep slower moving grout pumping thr...

Features Optional vibrating screen is needed when using loose material Used to screen loose materials larger than 5/16" that may contain rocks, st...

Features 1/2 hp 110v industrial grade motor with direct gear drive Choose a metal or poly drum 10" pneumatic wheels 5 cu ft poly or metal drum wi...

Features Includes metal face plates, rubber scrapers, and mounting hardware Install with a hand drill and 3/8" bit

Features Heavy duty vertical shaft mixer for dry pack mortar, mason's mortar for brick and high strength grouts for concrete pipe joints Equipped...

Features Honda gasoline, single or 3 phase electric motor options 12 cu ft drum capacity 9 cu ft batch output 18" pneumatic highway tires and tor...

Features Honda gasoline, single or 3 phase electric motor options 22 cu ft drum capacity 16 cu ft batch output 22" pneumatic highway tires and to...

Features Mix mortar, stucco, grout, epoxy, thin set, flooring products Mix up to a 50 lb. batch Use the wheels and handle for easy transport Gear...

Features Designed for spraying rough coats of premixed mortar, stucco and fireproofing Kit will fit Imer Mighty Small 50, Koine 4 and Koine 35 con...

Features 1-1/2 hp 110v industrial grade motor with oil bath gear drive 15" pneumatic wheels 12 cu ft capacity, steel drum with 9.5 cu ft output A...

Details Part Number 1107623 is the R8 ROTOR ONLY with the tab for the turbo mixer. It is used with the  black R8 hi flow stator used o...

Details Part Number 1107622 is the R8 STATOR ONLY. It is used with the black R8 ROTOR with turbo mixer tab that is used on the IMER Koine ...

Features Ideal for quickly and efficiently mixing Industry changing, high-output continuous mixers 1.8 hp 110v/60Hz industrial grade high torque ...

Features Ideal for quickly and efficiently mixing Industry changing, high-output continuous mixers 3 hp 220v single phase industrial grade high t...

Features Extremely versatile pump and spray machine for mortars, stuccos, grouts, restoration mortars, underlayments, fireproofing, waterproofing...

Features Aggressive paddles to mix fast and complete Available with a Honda gas engine or an industrial-grade electric 110V motor 1/2 hp 110v ind...

Features Aggressive paddles to mix fast and complete Available withan industrial-grade electric 110V motor 1/2 hp 110v industrial grade motor wit...

Features Workman II 350 - 12 cu ft capacity, steel drum with 9 cu ft output Workman II 250 - 9 cu ft capacity, steel drum with 6 cu ft output 20"...