Raimondi

Features Pair of vertical clamps for working at the edge of tiles/plates Made with stain-resistant rubber pushers and anti-sinking supports Des...

Features 1/16" (1.5 mm) grout joint CROSS-shape installation configuration Use on 1/8" to 5/8" (3 to 15 mm) thick tile Threaded strap is embedded ...

Features 1/16" (1.5 mm) grout joint Use on 1/8" to 5/8" (3 to 15 mm) thick tile Threaded strap is embedded into tile adhesive and cap spins down t...

Features 1/16" (1.5 mm) grout joint T-shape installation configuration Use on 1/8" to 5/8" (3 to 15 mm) thick tile Threaded strap is embedded into...

Features 1/32" (1 mm) grout joint Use on 1/8" to 5/8" (3 to 15 mm) thick tile Threaded strap is embedded into tile adhesive and cap spins down to ...

Features 1/32" (1 mm) grout joint Tall clip for use on 9/16" to 1" (14 mm - 26 mm) thick tile Threaded strap is embedded into tile adhesive and ca...

Features 1/8" (3 mm) grout joint CROSS-shape installation configuration Use on 1/8" to 5/8" (3 to 15 mm) thick tile Threaded strap is embedded int...

Features 1/8" (3 mm) grout joint Use on 1/8" to 5/8" (3 to 15 mm) thick tile Threaded strap is embedded into tile adhesive and cap spins down to l...

Features 1/8" (3 mm) grout joint T-shape installation configuration Use on 1/8" to 5/8" (3 to 15 mm) thick tile Threaded strap is embedded into ti...

Features Works with all sizes of VITE leveling clips Caps are fully reusable Threaded strap is embedded into tile adhesive and cap spins down to l...

Features Sold in 100-piece bags Washer ring for RLS VITE cap Scratch preventing protection Prevents any scratch or stain on tile during installat...

Features XPRESS drill attachment for cap installation and removal Use the XPRESS with an electric drill Screw the VITE caps onto clip using the XP...

Features Tile/slab vibrator to optimize adhesive coverage when installing large format tiles High frequency vibration guarantees maximum efficienc...

Features Pressurized water tank kit designed for the Power Raizor MkII and Power Miter cutting units Tank can hold a maximum of 8 liters (2.1 ga...

Features Includes: folding side extensions and 90° slide square Fits Raimondi wet rail saws

Features Easy to install side square Sets up on the right side of the saw Fits ALL Raimondi Gladiator and Zipper rail saws

Features Designed to hold multiple or large tiles down during the cutting process WSTH105 fits Gladiator/Zipper 105 (41") Rail Saw WSTH130 fits ...

Features Available in 4 sizes - Zipper 85 (34" rip cut), Zipper 105 (41" rip cut), Zipper 130 (51" rip cut) and Zipper 150 (61" rip cut) Belt dri...